Quantum Devices Optical Encoder Black/White Wire

What’s with this black-white wire?

Quantum devices QD145 and QD200 Optical Encoders feature an extra black & white-stripped wire that serves as an alternate grounding connection for the encoder.

This wire is intended to be used in situations where the encoder flex mount is not case grounded.  The Black/white wire is at the same potential as the Optical Encoder’s conductive polymer housing and  flex mount.

Internally the electrical path of the black-white wire is tied to the optical encoder housing and flex mount through the circuit board.  Our optical encoders tend to live on the back of hardware like Brushless DC motors, where the motor housing is at ground potential.  In cases like this it is usually best to leave the black-white wire tied off and floating.

Arrow showing flex mount grounding Optical Encoder to Motor.

Jim is an application engineer for Quantum Devices INC, a leading manufacturer of optical encoders.

Jim reached at jmiller@quantumdev.com.

Advertisements